Store Home | Low Level Access Equipment
The Kingfisher MINI platform is the result of 10 years of development. With its compact design, it is particularly suited to work in places where access is restricted or cramped with everyday work still in progress.
Compact dimensions allow the Kingfisher MINI to pass through standard doorways and its light weight allows it to travel in most passenger lifts.
Double extending decks give a large working platform and the mast-type construction allows it to work over desks without having to move them.
The DC Motor controller provides exceptional battery life typically 600 cycles to full height fully loaded or drive 12km on a full battery charge.
The white non-marking rubber tyres make this machine suitable for working on most finished floor surfaces.
Another great advantage of the Kingfisher MINI is the ease with which it can be transported and its ability to gain access to most work places. Capable of climbing slopes of up to 40%, the Kingfisher Mini can be supplied with a pair of light but tough alloy ramps allowing it to easily climb on and off delivery vehicles, or to climb steps and loading bays without the need for a forklift.
MINI Product Features
MINI Specifications
Options:
Please contact us to discuss the options you require, and to arrange a free quotation
The Runabout is a compact, low weight machine that is the perfect choice for increasing productivity on the job. The efficient operation and convenient setup of the Runabout makes it ideal for warehousing, stock-picking, transporting, inventory management, general maintenance and construction.
The Runabout from Kingfisher is available in three platform heights, 12, 15 and 20ft. The compact dimensions allow the unit to pass through standard doorways and fit easily into most passenger lifts.
Proportional drive and lift controls deliver a smooth ride making it easy to operate plus the ability to drive when fully elevated increases productivity on the job.
The 24 V DC electric motor provides clean power for indoor use. The high battery amp hour rating provides prolonged usage between charges. Overnight recharging is made easy with the dual voltage 110/240v 25 amp automatic charger.
The Runabout is fitted with non marking tyres which allow it to operate on the most sensitive flooring.
Runabout Product Features
Runabout Specifications
Back to Specification List
Replacing the need for ladders and steps in low level access environments, the Pop Up offers a multitude of special features giving you a safe yet simple solution to your low level access requirements.
Pop Up has been designed, manufactured and tested to both the European Standard EN280 for Mobile Elevating Work Platforms and the safety requirements of the European Machinery Directive 98/37/EC.
Pop Up Product Features
Pop Up offers a safe, cost-effective alternative to ladders and steps in low level access environments. Its detailed design ensures that Pop Up offers you the following benefits:
Pop Up Product Specification
Safe working load (SWL)
240kg (equivalent to 1 person + 160kg of tools and materials)
Dimensions
Maximum platform height
1.63 metres
Maximum working height
3.63 metres
Platform length
1.01 metres
Platform width
0.52 metres
Platform guard rail height
1.10 metres
Toe board height
0.15 metres
Toe board height (gate end)
0.10 metres
Maximum allowable manual force
200 Newtons
Maximum allowable wind speed
0 metres/sec
Maximum allowable chassis inclination
0 degrees
Electrical system
Voltage
12 volt DC
Motor
0.7kW
Battery
12v
Battery charger
Dual 110/240 volt
Hydraulic system
Maximum pressure
250 bar
Reservoir capacity
1 litre
Function speeds (approx.)
Raise
8 seconds
Lower
Approx number of lifts (fully charged with SWL)
300
Stowed dimensions
Overall length
1.135 metres
Overall height
1.636 metres
Overall width
0.700 metres
Weight
Overall mass (GVW)
270kg
Maximum wheel load
350kg
The new K13 trailer mounted articulated boom gives 13.2 metres working height and 5.9 metres outreach from only 1,390kg towing weight - that's light enough to tow with a medium sized car or van!
The K13's innovative boom design, combines high strength and rigidity with low weight. The K13’s third Flick Boom, now with 130° working arc, enables reach into those awkward places, often inaccessible with dual boom machines, while the 90° basket rotation gives the operator(s) the final basket positioning which is so important when working on facades or in tight roof spaces.
User friendly proportional hydraulic controls, pressure sensitive outrigger interlocks with easily read LED display, full manual emergency lowering from basket and fail-safe hydraulics ensure maximum operator safety and confidence.
The K13 is engineered and built to last. Robust full steel construction, fully bushed stainless steel pivots, quality components and tough durable powder coat finish, provide long term reliability and protection against wear and tear
Operating Dimensions
Basket Dimensions
Closed Dimensions
